18 Simple Oval Face Haircuts 2027 with Curtain Bangs

An oval face is the rare shape that can pull off a sharp bob and a long shag without looking like you lost a bet. The 2027 take on simple oval face haircuts leans into soft face-framing layers, lived-in color, and that glossy natural texture that makes air-drying look like a conscious choice.

These 18 ideas cover the full spectrum, from a blunt chin bob that demands a trim every six weeks to collarbone layers you can ignore for months. Fine hair that falls flat, a fringe that won’t cooperate, a grow-out line that shows too soon, every cut here solves at least one of those annoyances without asking you to spend an hour with a round brush.

Long Layers With Curtain Bangs

The genius of this cut is that the curtain bangs do the heavy framing while the long layers keep the hair moving. Mid-back length with soft, face-framing layers and a middle part works because the shortest layer hits around the cheekbone, which draws the eye outward and balances the oval’s natural symmetry. The blonde balayage adds dimension so the waves read as textured rather than flat.

Ask your stylist for: long layers with face-framing and curtain bangs. This suits thick, wavy hair that already reaches mid-back; finer textures might find the length drags the layers down. Use a round brush to blow-dry the curtain bangs away from the face for shape, and plan a trim every six to eight weeks to keep the ends from looking stringy.

Sleek Asymmetrical Chin Bob

Getting that sharp, angled line without it looking like a mistake starts with asking for the asymmetry to begin at the chin, with the front slightly longer than the back. The side-swept bangs and side part add movement to the straight, fine texture, so the cut doesn’t sit like a helmet. The ash blonde color keeps the sleek styling from feeling heavy, which matters when the hair is this precise. Ask your stylist for: sleek asymmetrical bob to the chin, side-swept bangs. This shape gives oval faces a bit of edge while the angle softens the jawline.

Textured Wavy Bob With Blunt Bangs

Blunt bangs on a chin-length bob are a commitment, and here is the honest trade-off: they make a strong statement but they will demand constant upkeep. The dark brown color and middle part let the textured, wavy finish do the talking, but those bangs need a trim every three to four weeks or they start grazing your eyes. On fine hair, the texture spray is your friend, but skip this if you hate forehead coverage or you’re not ready to style bangs daily. Ask your stylist for: chin-length bob with blunt bangs, textured finish. It’s a bold look for oval faces, but it’s not a wash-and-go situation.

Collarbone Bob With Soft Layers

If you’re torn between a blunt bob and a longer lob, this collarbone-length version splits the difference. The soft face-framing layers and curtain bangs give it the movement of a shag without the choppy texture, and the side part adds a touch of asymmetry to keep it interesting. The dark brown base with subtle highlights gives depth so the waves don’t fall flat. Ask your stylist for: collarbone bob with soft face-framing layers and curtain bangs. Blow-dry the curtain bangs with a round brush away from the face, and a trim every six to eight weeks keeps the shape from losing its bounce. It’s a versatile middle ground that works for medium, wavy hair and oval faces alike.

Collarbone Shag With Curtain Bangs

The shag is built on layers that start high and cascade down, which is why it creates so much movement on wavy hair. At collarbone length, the cut keeps enough weight to avoid looking like a mullet, while the curtain bangs and face-framing layers open up the oval face. The ash blonde highlights add a lived-in contrast that suits the textured finish. Ask your stylist for: collarbone shag with curtain bangs and face-framing layers. This is an everyday cut that works for a bohemian style, but it’s not a low-maintenance one: the layers need a trim every eight to ten weeks to keep their shape, and a sea salt spray is essential to enhance the natural wave.

Sharp Blunt Bob With No Bangs and Dark Brown With Subtle Highlights

A blunt bob is a geometry lesson and a haircut at once: the ends fall in one clean, unapologetic line. This chin-length version, with a side part and a smooth blowout on fine, straight hair, is a salon-only proposition because every angle has to be precise. Ask your stylist for a sharp blunt bob to the chin, no bangs. The subtle lighter streaks add depth without breaking the solid line. A flat iron keeps the straightness honest, but the real commitment is the trim: every six weeks, or the ends start to soften and the whole effect drifts toward accidental.

Long Layered Hair With Face-Framing Bangs

Is your hair thick and wavy enough to swallow a haircut whole? Long layers at mid-back length fix that, because they remove weight while keeping the length, and the face-framing bangs soften the shape around an oval face. The dark brown base with blonde balayage adds dimension without demanding much thought. Ask your stylist for: long hair with face-framing bangs and soft layers. A root-lifting product before blow-drying keeps the loose waves from falling flat, and a trim every ten to twelve weeks keeps the layers from growing into a shapeless curtain.

Wavy Lob With Soft Face-Framing Layers

This is a lob that works because the layers are soft, not aggressive. At collarbone length with a wavy texture and a side part, the face-framing layers follow the jawline without cutting into it, which is a safe bet for oval faces. The blonde balayage adds a sun-kissed effect, but the cut is the main event. Ask your stylist for: collarbone lob with soft face-framing layers. To make the ask land, specify that you want the layers to graze the cheekbones and blend into the rest, so the shape feels organic, not chopped. A wave-enhancing cream and a diffuser get you there at home, though the initial cut needs a salon.

Pixie Cut With Copper Highlights

A pixie cut at ear length with a side part and a side-swept fringe is a bold move, and the warm copper highlights on a dark brown base make it bolder. Fine, straight hair takes to this sleek styling well, and the cut suits oval faces by showing off the bone structure. Ask your colorist for: short pixie with side-swept fringe and copper highlights. The trade-off is upkeep: copper fades fast, so you will be back for a gloss or toner every four to six weeks, and the cut itself needs a trim on the same schedule to keep the shape from turning shapeless. A pomade helps define the fringe on non-wash days.

Shoulder Length Layers With Volume

How much volume can you get without a curling iron? Shoulder length layers with side-swept bangs answer that with a cut that builds in movement. Thick, wavy hair at shoulder length gets a boost from layers that remove weight, letting the natural wave spring up, and the bangs frame an oval face without hiding it. Ask your stylist for: shoulder length layered hair with voluminous waves and side-swept bangs. To get the volume at home, apply mousse to damp hair and diffuse, which takes about fifteen minutes and beats a flat result. A trim every eight to ten weeks keeps the layers balanced, and this cut is easier to maintain yourself once the shape is set.

Textured Chin Bob With Curtain Bangs

The design of a textured chin bob relies on deliberate disconnection: shorter interior layers lift the crown while the curtain bangs soften the transition from part to perimeter. The dark brown, medium-density hair is cut to the chin with a middle part, then styled into soft waves that build volume without looking teased. Ask your stylist for a textured bob to the chin with curtain bangs. A texturizing spray at the ends keeps the separation visible for a day or two between washes.

Wavy Collarbone Bob With Highlights

A uniform single-process blonde is lower maintenance at the root but can feel flat on a collarbone bob. This version uses subtle highlights scattered through the wave pattern, creating a lived-in effect that softens the grow-out line. The side part and loose blowout give the medium texture a glossy finish without requiring a flat iron.

Ask your colorist for a wavy collarbone bob with lived-in highlights. Scrunch with a lightweight mousse after washing, then air-dry or diffuse for a relaxed wave. Trim every eight weeks to keep the collarbone length from creeping into an awkward in-between zone.

Long Layered Golden Blonde Hair

Thick, wavy hair at mid-back length can feel heavy without structure. Subtle layers carved through the interior remove weight while preserving the density, so the golden blonde color looks rich, not flat. The side part and voluminous blowout push the wave pattern outward, giving the hair movement instead of a single curtain of shape.

Ask your stylist for long layered hair with volume in golden blonde. This cut works well for oval faces because the layers hit at angles that follow the natural symmetry. Anyone with fine or low-density hair should pass: the layers can thin the silhouette too much, leaving the ends looking sparse.

Mid-Back Layers With Prominent Curtain Bangs

To get curtain bangs that blend into long layers instead of sitting as an afterthought, start with the right words. The prominent curtain bangs on this mid-back, dark brown cut are cut to graze the cheekbone at their shortest point, then feather into the face-framing layers below. The middle part and voluminous blowout ensure the bangs sweep outward instead of falling flat against the forehead.

Ask your stylist for mid-back length hair with prominent curtain bangs and layers. Be specific: request that the bangs connect to the shortest layer around the jaw so the transition is seamless, not abrupt. A round brush and a heat protectant are all you need to redirect the bangs away from the face during styling.

Layered Bob With Stacked Layers

A collarbone bob with stacked layers is a salon-only proposition: the graduated shape at the back requires precise sectioning that is hard to replicate at home. The dark brown, thick density hair is cut with the shortest stacked layers sitting at the nape, building length toward the collarbone. The side part and smooth blowout emphasize the angular silhouette, which reduces bulk for thick hair while keeping the perimeter clean.

Ask your stylist for a collarbone layered bob with stacked layers. The stacked interior needs a trim every six to eight weeks to maintain its shape; letting it grow past that window turns the crisp graduation into a rounded blob. A round brush and a medium heat setting are enough to smooth the cut without flattening the stacked volume.

Collarbone Layers With Balayage

Soft face-framing layers cut to collarbone length pair with balayage that paints lighter ribbons mostly through the surface, creating natural movement without a stripe effect. The brown base and subtle warmth in the lighter pieces keep the color from looking flat, and the middle part lets the framing fall evenly on both sides. A medium wavy texture holds a soft blowout well, so this style typically stays polished through a full day. Ask your stylist for collarbone layers with face-framing pieces and balayage. This cut suits medium to thick hair types, as the longer layers maintain their shape without the ends turning stringy by week three.

Layered Bob With Textured Ends

A collarbone-length layered bob relies on internal weight removal, and the trade-off is right there in the ends: the more texture you cut in, the faster those ends can fray. The back view here shows loose waves moving through a dark brown base with subtle lighter pieces, and the visible layers do give the shape movement a blunt bob cannot match. But textured ends also mean the cut shows every sign of dryness faster, and a heavy hand with heat tools will accelerate split ends rather than just dulling the surface. Ask your stylist for collarbone layered bob with textured ends.

Upkeep is the honest part. You will need a trim every eight weeks, not ten, to keep the ends looking cut rather than chewed. A wave-enhancing product scrunched into damp hair buys you two days between washes, but the second day needs a quick refresh with water and product rather than a flat iron. If you air-dry often, you can stretch that trim cycle to ten weeks instead.

Long Layers and Curtain Bangs, Dark Brown

When you wash and air-dry long hair with curtain bangs, do you end up with flat roots and bangs that part wherever they please? The fix is a blowout that targets the bangs first and the mids last. Start with damp hair, clip the bangs forward and dry them side to side over a round brush so the curtain opens where you want it, not where the cowlick decides. Then rough-dry the length to about eighty percent, switch to the brush and focus on the face-framing layers around your jaw, pulling them forward as you dry to keep that soft bend. A medium heat setting and a cool shot on each section lock the wave in place. Ask your stylist for long hair with face-framing layers and curtain bangs.

The dark brown finish here is glossy, not matte, so a heat protectant with some shine left in it helps the blowout look polished without extra product. Thick hair holds this shape for two days if you sleep with a loose braid or a silk wrap. Layers at mid-back length need a trim every ten to twelve weeks to keep the curtain bangs from merging into the rest of the hair.

Final Thoughts

For oval faces, the main decision comes down to your hair density and how often you want to see your stylist. Fine hair benefits from a blunt baseline that keeps fullness, while thicker hair can handle more layers for movement without losing shape. Bangs can be adjusted to soften the forehead or add a sharp edge, both work.

• Trim blunt bobs every six to eight weeks to maintain sharp lines.
• Refresh face-framing layers and bangs every four to six weeks.
• Use a heat protectant spray before blow-drying or waving tools.
• Toning for blonde balayage may be needed every eight to ten weeks to combat brassiness.

Find the simple cut that speaks to your style and lifestyle.